We use cookies to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services. You consent to our cookies if you continue to use our website. Our policy.

 

Skip to content

*Product can differ from image

PENOSIL All Purpose Gunfoam 172 professional construction foam

PRODUCT DESCRIPTION
Professional polyurethane construction foam for most sealing and filling jobs in construction, such as installation of window and door frames, sealing of joints and penetrations, as well as thermal and acoustic insulation.

-------------------------------

ADVANTAGES
  • Dense and uniform structure.
  • Low secondary expansion.
  • Very good adhesion to various construction materials.
  • High-quality foam structure.
  • Suitable for work in hot weather up to +40 °C.
  • Application with a foam gun.

-------------------------------

APPLICATION
  • Installation and insulation of doors and windows in cold weather conditions.
  • Insulation and fastening of pipes.
  • Filling of holes and gaps, joint insulation.
  • Thermal and acoustic insulation.
SUITABLE SURFACES
  • Wood
  • Concrete
  • Masonry
  • Bricks
  • Most metals
  • Gypsum boards
  • EPS
  • Roof tiles
PACKAGING

Aerosol can 1000 ml,
filling 750 ml,
12 cans per box

-------------------------------

USAGE

Shake the can vigorously at least 20 times. Hold the can upright and remove the adapter cap. Screw the can onto the gun, holding the gun handle with one hand and screwing the can with the other. While screwing, make sure the gun is not pointed at people. The can must not be screwed onto the gun with the valve facing down or by screwing the gun onto the can. During use, turn the can upside down and press the gun trigger evenly. The amount of foam can be regulated with the gun trigger.

-------------------------------

TIPS
  • A pre-moistened surface ensures faster foam curing and better results.
  • At low temperatures, the foam should be warmed before use – room or water temperature must not exceed +30 °C.
  • Air temperature during application: from +5 °C to +40 °C, best results at +20 °C.
  • Can temperature during application: from +5 °C to +35 °C, best results at +20 °C.
  • Surfaces must be clean of dust, dirt, and oil.
LIMITATIONS
  • Cured foam is sensitive to UV rays and must be covered.
  • Do not use on surfaces that are in constant contact with water.
  • Insulation foam does not adhere to polyethylene (PE), PTFE (Teflon®), or silicone surfaces.

 

 

 

 

 

SPECIFICATION

Free measurement or consultation