We use cookies to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services. You consent to our cookies if you continue to use our website. Our policy.

 

Skip to content

*Product can differ from image

PENOSIL Standard Foam All Season polyurethane foam with applicator tube

PRODUCT DESCRIPTION

Insulation foam with straw applicator for most filling and sealing tasks of small volumes under various weather conditions.

ADVANTAGES
  • Economical packaging suitable for small tasks.
  • Smooth foam structure. Good filling properties.
  • Very good adhesion to various construction materials.
  • Cured foam provides good thermal and sound insulation.
  • Easy to use thanks to the included straw applicator.

 

APPLICATION AREAS
  • Filling holes and gaps, joint insulation.
  • Installation and insulation of building structures.
  • Insulation and fixing of pipes.
  • Thermal and sound insulation.
SUITABLE SURFACES
  • Wood
  • Concrete
  • Masonry
  • Brick
  • Most metals
  • Gypsum boards
  • Polystyrene
  • Roof tiles
PACKAGING

трубочна піна

Aerosol can 1000 ml,
filling 640 ml,
12 cans per box

 

INSTRUCTIONS FOR USE

Hold the foam can in a vertical position.
Screw the applicator (straw) onto the valve of the foam can.
Shake the can at least 20 times before use.
To start using, turn the applicator upside down and press the trigger.
Foam output can be adjusted using the applicator trigger.

 

TIPS
  • A pre-moistened surface ensures faster curing of the foam and the best result.
  • The can should be warmed before starting work at low temperatures. The temperature of the room or water used for warming must not exceed +30 °C.
  • Air temperature during application should be between -10 °C and +30 °C, with best results at +20 °C.
  • Surfaces must be clean from dust, loose particles, and oil.
  • Can temperature during application should be between +5 °C and +25 °C, with best results at +20 °C.
LIMITATIONS
  • Cured foam is sensitive to ultraviolet radiation and must be protected from it.
  • Do not use on surfaces that are in constant contact with water.
  • Insulation foam does not adhere to polyethylene (PE), polytetrafluoroethylene (Teflon®), or silicone surfaces.
SPECIFICATION

Free measurement or consultation