We use cookies to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services. You consent to our cookies if you continue to use our website. Our policy.

 

Skip to content

*Product can differ from image

PENOSIL Premium Gunfoam 65 Winter PU-foam with increased output for winter

PRODUCT DESCRIPTION

PENOSIL Premium Gunfoam 65 is a professional gun foam with increased output for large-scale sealing and filling works in winter conditions.

-------------------------------

VALUES
  • Output 15% higher than regular foam.
  • Even structure and low post-expansion.
  • Very good adhesive properties.
  • High-quality result under various weather conditions.
  • Application with foam gun.

-------------------------------

APPLICATION AREAS
  • Installation and insulation of doors and windows in cold weather.
  • Insulation and fixation of pipes.
  • Filling of holes and gaps, insulation of joints.
  • Thermal insulation and soundproofing.
ADHERES TO
  • Wood
  • Concrete
  • Masonry
  • Bricks
  • Most metals
  • Gypsum boards
  • EPS
  • Roof tiles
PACKAGE

Aerosol can 1000ml,
content 900ml.
12 cans in a box.

-------------------------------

USAGE INSTRUCTION

Hold the foam can in upright position and turn the gun side by holding the gun handle with one hand and turn the can with the other hand.

Make sure that the gun is not pointed to at other persons when turning it.

The can must not be screwed to the gun with the valve upside down or by turning the gun on the can.

After fixing the gun, shake the can well at least 20 times and turn into application position.

The foam output can be adjusted by gun trigger.

-------------------------------

TIPS
  • A previously moistened surface ensures faster curing of the foam and a better result.
  • At low temperatures the foam can must be warmed before work. The temperature of the warming room or water must not exceed +30°C.
  • Air temperature during application -10°C to +30°C, best results at +20°C.
  • Can temperature during application +5°C to +25°C, best results at +20°C.
  • The surfaces must be clean from dust, loose particles and oil.
LIMITATIONS
  • Cured foam is sensitive to UV radiation and needs to be covered.
  • Do not use on surfaces that are in constant contact with water.
  • Insulation foam does not adhere to polyethylene (PE), PTFE (Teflon®) or silicone surfaces.

 

SPECIFICATION